fitting a drill chuck into a pillow block (building a maintenance lathe)
Posted 03-28-2020 at 10:33 PM by Snooker Theory
Quote:
Originally Posted by skogstokig
look at this video: https://www.youtube.com/watch?v=5m92gbCVyb0
i happen to have two pillow blocks, not unlike his, and a strong sewing machine motor, so i'm gonna build a maintenance lathe. got delrin collets, ball bearings and all i need to set it up - except the chuck part.
does anyone know how its done? the pillow block bearings ID are 20 mm. i'm thinking to scrap a cheap battery powered drill for the chuck part, and then get a pulley, but what do i fit in between the pulley and the chuck that is 20 mm thick?
i happen to have two pillow blocks, not unlike his, and a strong sewing machine motor, so i'm gonna build a maintenance lathe. got delrin collets, ball bearings and all i need to set it up - except the chuck part.
does anyone know how its done? the pillow block bearings ID are 20 mm. i'm thinking to scrap a cheap battery powered drill for the chuck part, and then get a pulley, but what do i fit in between the pulley and the chuck that is 20 mm thick?
Total Comments 0
